3.55 Jailbreaking Tutorial

Post or find tutorials, how-to, guides, tips & tricks here
Post Reply
shadowfuuk
Junior Member
Posts: 11
Joined: Wed Oct 08, 2014 11:03 am

3.55 Jailbreaking Tutorial

Post by shadowfuuk » Wed Oct 08, 2014 12:41 pm

3.55 Jailbreaking Tutorial

(THIS IS NOT FOR ANY FIRMWARE ABOVE 3.55, SO DONT ASK, IF OR WHEN ONE IS RELEASED, I WILL WRITE A NEW ONE OR UPDATE THIS ONE WITH THE NEEDED STEPS.)

I will WRITE A new one for Rogero 1.01 4.46 CFW


The PS3 must be on 3.55 FW


Now in this tutorial i will explain to you how to flash your ps3 with the required jailbroken
pup, then install MultiMAN

1. ps3
2. usb stick formated to fat 32
3. ps3 on fimware 3.55 or below
4. ps3 official 3.55 firmware (download below)
5. kmeaw 3.55 pre patched pup (download below)
6. the ability to read
7. Winrar or UnrarX (download below)

Now lets start.
--------------------------------------------
Part 1 :

Installing Custom Firmware Kmeaw

Ok so your on 3.55 official Sony firmware. Now it is time to install a CFW / MFW aka
custom firmware / modified firmware

This is going to be the same as part 1. You will download a pre patched cfw (KMEAW)
This is the most stable and best firmware for someone new to jailbreaking.

Download kmeaw from one of the links below.
3.55 CFW Download

After you have downloaded this, then you will need to extract the pup from the rar file
this is where you will need winrar for windows or unrar for mac.

here are the links

Winrar (for windows)
Winrar


UnrarX (for mac)
UnrarX


Now that you have downloaded the above pup, and extracted it, create a folder on your usb stick (fat 32)
called PS3. Then in that folder create another folder named UPDATE. Then Place your
update in there. So it should look like this.

X:/PS3/UPDATE/PS3UPDAT.PUP

Now update via recovery menu or the xmb.

Congradulations, you are now jailbroken your ps3. Now i warn you
DO NOT UPDATE FOR ANY REASON.


Part 3

Installing Your Backup Manager (MultiMAN)
Now that we have jailbroken your ps3, you should now have 2 extra icons in your xmb
under the game catagory. Install PKG Files and App_home/ PS3 Game.

Now time to install your backup manager. There are a few to choose from.
The one I will have you install is multiMAN because it is the best.

multiMAN 04.07.01 FULL download

https://www.sendspace.com/file/bzg0xc

now that we have downloaded multiMAN put it on the root of your usb stick. It should
look like this.

X:/multiman.pkg

Put the flash drive in your ps3 and navigate to install pkg files. Install multiMAN.
now you should see multiMAN under the catagory game in the XMB.

Part 4


Backing Up A Game With MultiMAN
Insert the game you wish to backup to your ps3. You can back up games to a external
hard drive, but it also must be formated to fat 32.

Now that you have a game in your ps3. I suggest you choose a older game so that we
dont have problems. Just until you get the hang of it. Launch multiMAN. hover over the
game and hit triangle on the ps3 controller. If you are backing up to internal choose yes.
If you wish to back up to external choose no, and you will be asked if you want to do external
choose yes.

Ok so now the game is backed up. Eject the disc and put in another. Now in multiMAN
choose the game that you backed up. It should kick you back to the XMB. This is normal.
Now the disc that you have in the drive should be labeled as the game you selected in
multiMAN.

Enjoy playing Backups.

ATTENTION: Don't Connect your PS3 to The Internet HAPPY HACKING

From : Ps3Hax
Last edited by hackinformer on Thu Oct 09, 2014 2:49 pm, edited 1 time in total.
PSVita 3G/Wifi 3.30 FW
Xbox 360 Phat 120 GB Litetouch
Post Reply